KnowledgeGrid StabilityEnergy GridUtilityKnowledge
Dispatch & Redispatch

The term ‘dispatch’ refers to resource planning at a power plant by the plant’s operator. ’Redispatch’ refers to a short-term change in how a power plant is utilized. This request comes at the behest of a transmission system operator to prevent bottlenecks in the grid.

See more
KnowledgeGrid StabilityFrequency ControlUtilityKnowledge
Utility frequency

It is well-know that household alternating current (AC) in Germany and Europe has a frequency of 50 Hertz (Hz), while other parts of the world run on 60 Hz. What is less known is that this utility frequency (also known as mains frequency or grid frequency) also provides information about the ratio of electricity generation to electricity consumption in a power grid. If the frequency drops too low, there is not enough electricity in the grid; if the frequency increases too much, there is too much electricity in the grid. An intelligent supply-demand mechanism and a functional system for ancillary services to compensate for frequency deviation is necessary to keep the utility frequency at a stable 50 or 60 Hz.

See more
KnowledgeVPPEnergy TradingEnergy ExchangeKnowledge
OTC trading

If a buyer and a seller execute a sales contract for a physical item, the seller hands the product over the counter to the buyer. This is the essence of "over the counter" or OTC trading. In power trading, no physical goods are exchanged, but the principle of a direct, over-the-counter trade for electricity is the same. These trades take place outside of power exchanges without intermediaries or clearing houses. In OTC trading, trading partners are in direct contact with each other or make use of a broker. The transactions themselves occur on trading platforms online or through brokerage companies. Agreements on trading volumes and pricing are reached individually and bilaterally among the parties, but contractual standards for simplification and risk mitigation are gaining acceptance. OTC trading is a common practice in the energy market, representing the largest volume of electricity market transactions in many countries. Conventionally-sourced power is more common for OTC trades than renewably-sourced electricity.

See more
KnowledgeGrid StabilityEnergy GridEuropean gridKnowledge
Grid code

The grid code, also known as the transmission code in some countries, is the set of rules a transmission system operator (TSO) uses to define conditions for accessing the electricity grid. Depending on the country, the distribution system operator (DSO) fixes rules for the electricity grid at the low-voltage or distribution level separately in the distribution code.

See more
KnowledgeForecastingDemand ResponseBattery StorageKnowledge
Peak shaving

In the energy industry, peak shaving refers to leveling out peaks in electricity use by industrial and commercial power consumers. Power consumption peaks are important in terms of grid stability, but they also affect power procurement costs: In many countries, electricity prices for large-scale consumers are set with reference to their maximum peak-load. The reason is simple: the grid load and the necessary amount of power production need to be designed to accommodate these peak loads.

See more
KnowledgeForecastingGrid BalancingPower GridKnowledge
Balancing group

On the energy market, the balancing group (also known as the balancing authority) accounts for all power produced and/or consumed by a collection of assets within the group. Accounting for the group’s net production or consumption serves as an instrument for providing a particular operating region the precise amount of power it needs. The group manages the balancing act between power feed-in and off-take. This is designed to avoid over- and underproduction as much as possible by efficiently utilizing the power grid with minimal frequency fluctuations. Ultimately, the goal is to simultaneously match the amount of power consumed and produced within the grid.

See more
KnowledgeVirtual Power PlantRenewable EnergyEnergy TransitionKnowledge
DERMS

A distributed energy resources management system (DERMS) is a platform which helps mostly distribution system operators (DSO) manage their grids that are mainly based on distributed energy resources (DER). By lack of a common definition, a DERMS thus – depending on your point of view – is something similar or even identical with a Virtual Power Plant (VPP). 

On some key aspects, people seem to agree: DERMS is a software platform that is used to organize the operation of the aggregated DER within a power grid. The usual DERMS application is found at the distribution grid level. DERMS typically require a more full-fledged integration of various other systems such as a distribution management system (DSM) for integrating it with a utility. Furthermore, an outage management system (OMS) or a supervisory control and data acquisition (SCADA) system is usually needed to provide all DERMS functionality.

See more
KnowledgePower tradingEnergy MarketElectricity MarketKnowledge
Energy-only Market

In terms of the underlying concepts, an energy-only market is the opposite of a capacity market. An energy-only market only compensates power that has been produced. A capacity market, on the other hand, compensates the mere readiness, or capacity, for power production. To ensure supply is guaranteed, the energy-only market is supplemented by various flexibility options, such as control reserve markets. Beyond that, there are usually additional reserve models similar to a capacity market aimed at guaranteeing supply.

See more
KnowledgePower tradingEnergy TradingEnergy ExchangeKnowledge
List of power & energy exchanges worldwide

If you have additional information that may be useful to enhance this list or if you find errors in this list, please write us at info@next-kraftwerke.com. And please do also write us in case you are looking for an energy trader, we may already be active in the region you are looking for…

See more
KnowledgeVPPVirtual Power PlantBusiness ModelDecentralizationKnowledge
Virtual Power Plant

In a Virtual Power Plant, decentralized units in a power network are linked and operated by a single, centralized control system. Those units can be either power producers (e.g. wind, biogas, solar, CHP, or hydro power plants), power storage units, power consumers or power-to-X plants (such as power-to-heat and power-to-gas). When integrated into a Virtual Power Plant, the power and flexibility of the aggregated assets can be traded collectively. Thus, even small units get access to the lucrative markets (like the market for balancing reserve) that they would not be able to enter individually. Any decentralized unit that consumes, stores, or produces electricity can become a part of a Virtual Power Plant. 

Additionally to operating every individual asset in the Virtual Power Plant, the central control system uses a special algorithm to adjust to balancing reserve commands from transmission system operators and to grid conditions – just as a larger, conventional power plant does. Furthermore, the Virtual Power Plant can react quickly and efficiently when it comes to trading electricity, thus adjusting plant operations according to price signals from the power exchanges.

The market changes, the powerplants have to follow: Global energy markets are facing major changes. We move from a model with centralized electricity generation in power plants operated by large utilities towards a mix of decentralized and often renewable energy production in small facilities. Those small scale plants are typically owned by small companies or households, who become ‘prosumers’: consumer and producer at the same time. 

We experience a true paradigm shift. The further penetration of renewable energy generation challenges the conventional way of operating our electricity system. Business models have to be reinvented and our grids redesigned. The variability of renewable sources like sun and wind do not necessarily endanger the system balance as long as they are dealt with appropriately. And that is exactly where a Virtual Power Plant (VPP) comes in.

See more